Fagor 8025 M CNC, Translation Of The Original Manual

Page: 156 / 180

Remote modules.
CNC 8060
CNC 8065
7.
RCS-S-4F4
AO (SERCOS-II
PROTOCOL).
Error codes and
messa
ges on the Sercos co
unter.
·156·
(R
EF
: 1906)
E186 INDUCTOSYN: Linear encoder unstable on Power-ON, E21A feedback.
E286 INDUCTOSYN: Linear encoder unstable on Power-ON, E21B feedback.
E386 INDUCTOSYN: Linear encoder unstable on Power-ON, E21C feedback.
E486 INDUCTOSYN: Linear encoder unstable on Power-ON, E21D feedback.
The position read when initializing the ABSIND module is unstable. Check that the axis is not moving
while starting up or initializing. Check the cable and the connection between the ABSIND module and
the inductosyn/resolver feedback device. Check the ground connections in the electrical cabinet
(electrical noise on the signals). If the error persists and cannot be changed with the previous actions,
try replacing the ABSIND module and/or the cable associated with that feedback. If the error persists,
contact Fagor Automation.
E187 INDUCTOSYN: Wrong EEPROM checksum, E21A feedback.
E287 INDUCTOSYN: Wrong EEPROM checksum, E21B feedback.
E387 INDUCTOSYN: Wrong EEPROM checksum, E21C feedback.
E487 INDUCTOSYN: Wrong EEPROM checksum, E21D feedback.
Check the gain and phase values of the ABSIND module with the adjustment software. If the error
persists and cannot be changed with the previous actions, try replacing the ABSIND module associated
with that feedback. If the error persists, contact Fagor Automation.
E188 INDUCTOSYN: Unknown error at E21A feedback.
E288 INDUCTOSYN: Unknown error at E21B feedback.
E388 INDUCTOSYN: Unknown error at E21C feedback.
E488 INDUCTOSYN: Unknown error at E21D feedback.
The ABSIND module has generated an unknown error. The error is likely due to bad performance. It
the error is repetitive and persistent, try replacing the ABSIND module associated with that feedback.
If the error persists, contact Fagor Automation.
E189 INDUCTOSYN: Incoherent SSITYPE parameter with feedback device type connected to
E21A feedback.
E289 INDUCTOSYN: Incoherent SSITYPE parameter with feedback device type connected to
E21B feedback.
E389 INDUCTOSYN: Incoherent SSITYPE parameter with feedback device type connected to
E21C feedback.
E489 INDUCTOSYN: Incoherent SSITYPE parameter with feedback device type connected to
E21D feedback.
Check the dipswitch S50 of the ABSIND module. The selected value must be coherent with CNC
machine parameter SSITYPE and with the feedback type (inductosyn/resolver) connected to the
ABSIND module.
E192 wrong REFPULSE parameter at E21A feedback.
E292 wrong REFPULSE parameter at E21B feedback.
E392 wrong REFPULSE parameter at E21C feedback.
E492 wrong REFPULSE parameter at E21D feedback.
The value of machine parameter REFPULSE is inconsistent with the type of feedback connected.
Try changing its value. If the problem persists, contact Fagor Automation.
E193 Fagor digital feedback. Error on the absolute track. E21A feedback.
E293 Fagor digital feedback. Error on the absolute track. E21B feedback.
E393 Fagor digital feedback. Error on the absolute track. E21C feedback.
E493 Fagor digital feedback. Error on the absolute track. E21D feedback.
It cannot calculate the absolute position. Feedback pulses lost. The analog signal < 0.20 Vpp.
Check that the encoder is working at proper speed. Check mounting tolerances. Clean the glass or the
steel tape of the linear encoder. If none of the previous solutions solves the error, replace the encoder
or encoder head.
E194 Fagor digital feedback. CPU error. E21A feedback.
E294 Fagor digital feedback. CPU error. E21B feedback.
E394 Fagor digital feedback. CPU error. E21C feedback.
E494 Fagor digital feedback. CPU error. E21D feedback.
Damaged encoder or encoder head. Replace the encoder or the encoder head.
E195 Fagor digital feedback. Error at the adjustment potentiometers. E21A feedback.
E295 Fagor digital feedback. Error at the adjustment potentiometers. E21B feedback.
E395 Fagor digital feedback. Error at the adjustment potentiometers. E21C feedback.
E495 Fagor digital feedback. Error at the adjustment potentiometers. E21D feedback.
Damaged encoder or encoder head. Replace the encoder or the encoder head.