Fagor 8025 M CNC, Translation Of The Original Manual

Page: 134 / 180

Remote modules.
CNC 8060
CNC 8065
7.
RCS-S-4F4
AO (SERCOS-II
PROTOCOL).
Ha
rd
ware function
ality.
Co
nne
ctors.
·134·
(R
EF
: 1906)
7.6.1 Pinout and connector characteristics (front).
·A22 24 V DC supply input.
·Boot· Button to update the software.
·Reset· Reset button.
·B32· Sercos-II bus connection.
·S38· Address (node) of the element within the bus.
Connector data.
Number of poles. 3.
Pitch. 7.62 mm.
Connection technique. Screw connection.
Minimum/maximum tightening torque. 0.5 / 0.6 Nm.
Minimum/maximum section.
0.2 / 2.5 mm².
Rated current In. 12 A.
Cable data.
Length to be stripped. 7 mm.
See "7.5 Voltage supply for the module." on page 131.
Plug-in part 3-pole Phoenix-contact combicon connector (7.62
mm pitch). Rated current; 12 A.
Pin Signal. Function.
1 - - -.
2 11 0 V reference signal.
3 +24 V Power supply.
·Boot·
Button to update the software. This button is for the exclusively
use by personnel authorized by Fagor Automation.
·Reset·
Magazine reset.
BOOT
·IN· & ·OUT· connectors Honeywell emitter and receiver.
Signal. Function.
IN Sercos signal receiver.
OUT Sercos signal emitter.
Each one of the elements integrated into the Sercos bus is
identified by the 16-position rotary switch (0-15).
The CNC must always occupy position "0" and the rest of the
elements of the bus will occupy consecutive positions starting
with 1. In order for any change at this switch to be assumed,
the module must be reset and the CNC powered off and back
on.