Fagor 8025 M CNC, Translation Of The Original Manual

Page: 163 / 180

Remote modules.
CNC 8060
CNC 8065
RCS-S-4F4
AO (SERCOS-II
PROTOCOL).
7.
Software install
ation/up
date.
·163·
(R
EF
: 1906)
7.11.1 Set the default Boot.
Display the top menu "SetUp" > "Preferences" > "Boot". Use this menu sequence to set the
"Default Boot Type" and also uncheck the option "Ask for boot type".
After clicking on "OK", the next time the "Boot" icon of the tool bar is pressed on the home
screen of WinDDSSetup, it will no longer display the "BootType" window. The application
will execute the options selected in the drop down list "Default type of Boot” directly, which
in this case is "BOOT_RCS_S".
7.11.2 Communication parameters.
Display the top menu "SetUp" > "Preferences" > "Communication". Use this menu to set the
main parameters involved in the communication between the PC and the remote module
"RCS-S". These parameters are applied by default when starting a new session with
WinDDSSetup. Any changes made in this dialog box has an immediate effect.
Parameter. Meaning.
Port. Select the communication port.
Options: COM1 or COM2.
Speed (bd). Select communication speed.
Options: 9600 or 19200.
Protocol. Select communication protocol.
Options: DNC50 - Monoslave, DNC50 - Multislave, MODBUS-RTU or
MODBUS-ASCII.
Connection. Select connection through RS-232 or RS-422 serial line after selecting
MODBUS RTU or ASCII protocol.