7.
Move the pin to the far inside position on the operator arm. Do this by
turning the manual re-
lease key in the front lock hole counter
-
clockwise until it reaches the rear stop position.
Extend the operator pin in this manner ONLY. Any other method may damage the arm.
NOTE: The front stop position
IS NOT THE FULL CLOSED
POSITION,
it is the common point of reference for counting manual
8.
Insert the bracket bushing into the gate mounting bracket.
9.
While holding the front fitting in the bracket bushing and gate mounting bracket, insert the man-
ual release key. Turn the key
clockwise
3 turns. This is the
FULL CLOSED POSITION.
8.3
3 Turns Clockwise
-
This is the correct Closed Gate mounting position.
Estate Swing
Summary of Contents for Estate Swing E-S 1100 Series
Page 51: ...9 4 Estate Swing...