Complete Start/Stop Learning Process
8.6
If the learning process was completed using the simple one touch process this process can be by-
passed.
This procedure is used to define the deceleration and stop points of the operator or operators. The
procedure differs depending whether it is single leaf or double leaf. Make sure the leaves are
closed.
Procedure for single leaf gates
While the 5 LEDs are lit steadily, hold down
P2
for about 3 seconds.
The operator will start the maneuver process.
Using
P2, Briefly
press the button once for each of the
following motion transitions:
1)
Press P2 to teach leaf opening deceleration starting point.
Enter the programming mode by pressing
P1
6 times until all 5 LEDs (A,B,C,D,E) are lit.
This is the learning mode.
Press for
3
Second
Estate Swing
Enter Learning Mode
Summary of Contents for Estate Swing E-S 1100 Series
Page 51: ...9 4 Estate Swing...
