3.5
8.
Insert the threaded rear fitting into the already clamped
post mounting bracket.
9.
Position the gate mounting bracket on a cross member of
the gate suitable for supporting the arm and bracket with the
gate in the
FULL CLOSED POSITION pressed firmly
against the closed stop
. Use a second C
-
clamp to hold it in
place.
10.
Check the levelness of your operator on the
Bottom
of the arm. Do not use the top to check levelness as it
is a sloped surface.
Make the appropriate adjust-
ments, and check your setback one last time to be sure
the positioning did not shift during leveling.
11.
In order to remove your operator arm from the gate mount-
ing bracket for marking and drilling, the manual release key
will need to be turned
counter clockwise for 2 turns.
IMPORTANT
-
During this procedure let the gate move
with the turning of the manual re-
lease key. DO NOT let the gate
mounting bracket slip from its
positioning or you will have to start
again at step 6.
Turn Counter Clockwise
at least 2 turns.
Estate Swing
Summary of Contents for Estate Swing E-S 1100 Series
Page 51: ...9 4 Estate Swing...