Installation of Mounting Hardware and Arm
3.2
1.
Set up closed stop points for your gate.
The closed stop points can be a plate on
the end of the gate that comes in contact
with an adjacent post or an industrial door
stop. (Many gates need an extension piece
added to make contact with the doorstop.
Examples of stops
Examples of industrial
door stops
2.
First clamp the “L” shaped post mounting bracket to the
post. The side with two holes, rectangular in shaped, should
be against the post.
3
. Line up the center hole on the “tear” shaped post
mounting bracket with the hole on the on the “L” shaped
bracket. Insert the 3/8”x1” bolt and loosely affix the nut
and washer.
Estate Swing
Summary of Contents for Estate Swing E-S 1100 Series
Page 51: ...9 4 Estate Swing...