2.2
IMPORTANT: Charging Battery Prior to Use
Before beginning any electrical stages of installation we highly recommend charg-
ing the battery on the control board for
12 hours.
This can be done anywhere there
is an outlet available.
1.
Plug the battery into the control board (fig 1). For charg-
ing purposes it is not necessary to hook the receiver to
the battery or control board.
2.
Insert the wires from the
supplied AC transformer
into terminal J2 of the Master
board which is to the left of the battery terminal and fuse (fig 2).
NEVER RUN 110V AC or POWER IN
THROUGH ANY OTHER METHOD BE-
SIDES THE PROVIDED TRANSFORMER
TO THE CONTROL BOARD.
Fig 1
Fig 2
Master or Single Unit
Charging ONLY
Estate Swing
Summary of Contents for Estate Swing E-S 1100 Series
Page 51: ...9 4 Estate Swing...
