2)
Let the leaf make contact with the full open stop
point. The opener will then stop and reverse direc-
tions.
OR if not using open stops
2 alt.)
Press P2 to stop the openers opening mo-
tion and reverse the motion of the gate.
Without open stop, press P2
3)
Press P2 to teach leaf deceleration
starting point for closing.
4)
Let the leaf make contact with the full closed stop point.
Press
P1
to exit the learning mode.
You may now test your gate opener or continue on with
changes to the factory speed, force, delay settings.
To test
your opener, briefly touch a wire from terminal 1 to one
of the negative terminals (12, 13, 14, or 15).
With open stop, let the gate
make contact,
don’t
press P2
Estate Swing
8.7
Summary of Contents for Estate Swing E-S 1100 Series
Page 51: ...9 4 Estate Swing...
