manualshive.com logo in svg

Extreme Networks Ridgeline 3.0, Manual

Introducing Extreme Networks Ridgeline 3.0 – the ultimate network management solution. With our comprehensive user manual, available for free download at manualshive.com, you can unlock the full potential of this cutting-edge product. Take control of your network like never before with our easy-to-follow manual, ensuring seamless connectivity and maximum efficiency.

Share
Download
background image

  

Managing and Monitoring VPLS Domains

Ridgeline Concepts and Solutions Guide

128

Figure 87: Pseudowire Details Window

Configuring VPLS

Using Ridgeline, you can configure fully meshed and hierarchical (hub-and-spoke) networks. VPLS 
configuration tasks are performed using Ridgeline’s scripting feature.

Running VPLS Configuration Scripts

Using Ridgeline scripts, you can perform the following tasks:

●

Create a VPLS domain

●

Associate peers with a VPLS domain

To run an Ridgeline script, click Scripts under the Network Administration folder to view the list of 
available scripts, then select the script you want to run from the list. 

Figure 88

 shows the parameter 

configuration screen for the 

Create VPLS

 script.

Summary of Contents for Ridgeline 3.0

























































































































































































































































































































































































Reviews:

No comments

Related manuals for Ridgeline 3.0

Canon EOS-1D Mark II Digial Software Manual preview
EOS-1D Mark II Digial
Brand: Canon Pages: 2
Canon imagePROGRAF W6400 Manual preview
imagePROGRAF W6400
Brand: Canon Pages: 84
M-Audio Heavy Guitars Quick Start Manual preview
Heavy Guitars
Brand: M-Audio Pages: 4
Drobo How-To Manual preview
How-To
Brand: Drobo Pages: 6
MacroSystem Digital Video DVD-Arabesk 2 User Manual preview
DVD-Arabesk 2
Brand: MacroSystem Digital Video Pages: 28
Euphonix MixView 3.0 Overview preview
MixView 3.0
Brand: Euphonix Pages: 8
KAPERSKY ANTI-VIRUS - FOR FREEBSD-OPENBSD-BSDI MAIL SERVER User Manual preview
ANTI-VIRUS - FOR FREEBSD-OPENBSD-BSDI MAIL SERVER
Brand: KAPERSKY Pages: 295
Quantum PX500 Series Installation Instructions Manual preview
PX500 Series
Brand: Quantum Pages: 26
Quantum Management Console 4.4 User Manual preview
Management Console 4.4
Brand: Quantum Pages: 120
Avaya Unified Messenger Manual preview
Unified Messenger
Brand: Avaya Pages: 35
Red Hat CLUSTER SUITE 4.7 DM MULTIPATH Configuration And Administration Manual preview
CLUSTER SUITE 4.7 DM MULTIPATH
Brand: Red Hat Pages: 38
APPLIED ACOUSTICS SYSTEMS ULTRA ANALOG User Manual preview
ULTRA ANALOG
Brand: APPLIED ACOUSTICS SYSTEMS Pages: 60
Navman SmartST 2009 User Manual preview
SmartST 2009
Brand: Navman Pages: 82
GRASS VALLEY K2-AVID TRANSFER MANAGER Datasheet preview
K2-AVID TRANSFER MANAGER
Brand: GRASS VALLEY Pages: 2
beat buddy MANAGER Manager Manual preview
MANAGER
Brand: beat buddy Pages: 33
Palm Phone Link Handbook Handbook preview
Phone Link Handbook
Brand: Palm Pages: 22
MACROMEDIA FLEX-FLEX BUILDER Tutorial preview
FLEX-FLEX BUILDER
Brand: MACROMEDIA Pages: 56
Magellan eXplorist 210 Quick Reference Manual preview
eXplorist 210
Brand: Magellan Pages: 14

Brands by name

Popular brands

Load more brands