Extreme Networks Ridgeline 3.0 Manual Download Page 282 | Manualshive

Page: 282 / 376

background image

Using Identity Management

Ridgeline Concepts and Solutions Guide

280

●

If the connection succeeds, the second server is marked Active and all further LDAP requests are
sent to the second server and so on.

Configuring LDAP server settings internally, deploys the settings to all Identity Management enabled
switches. If you add LDAP server settings without Identity Management enabled switches, later when
you enable Identity Management, Ridgeline uses the configured server settings for deployment.

Viewing the Server Directory

To view configured servers and directory credentials, do the following:

1

Go to Folder List>Ridgeline Administration>ID Management: Network Users>Directory servers tab.

2

Choose the Servers tab which lists the servers.

Managing Global Directory Servers

To set the Global server credentials, do the following:

1

Go to ID Management: Network users>Directory Servers tab>Servers. Select a server on the
Directory Servers list.

Or, you can select a server on the Directory Servers list and open the Global Settings tab.

The LDAP server credentials dialog box opens.

2

Enter the Base Domain Name, User Name, and Password. See

Figure 236

.

Figure 236: Global Directory Credentials Dialog

3

Click Reset to Defaults, Save changes, or Cancel.

Configuring a New Directory Server

To configure a directory server, do the following:

1

Open the Directory servers tab.

2

On the menu bar, go to File>Manage Servers. The LDAP Server Configuration dialog box opens
showing the currently configured LDAP servers. See

Figure 238

.

«
...
280
281
282
283
284
...
»

Summary of Contents for Ridgeline 3.0

























































































































































































































































































































































































Reviews:

No comments

Related manuals for Ridgeline 3.0

Brand: F-SECURE Pages: 18

Lazett Combo SCX-4116

Brand: Samsung Pages: 165

ML 1630 - B/W Laser Printer

Brand: Samsung Pages: 18

Brand: 3Com Pages: 4

eTrex H - Hiking GPS Receiver

Brand: Garmin Pages: 100

OneVision DEFINITY G3 Fault Management and integration

Brand: AT&T Pages: 153

Exagerate ZELIG-CAM PRO

Brand: Hamlet Pages: 6

Brand: ICP Pages: 16

IronKey Workspace Provisioning Tool 1.0

Brand: Imation Pages: 19

NETWORK BASIC - USER REFERENCE GUIDE 3.2

Brand: Red Hat Pages: 76

DEVICE FILTER MAC

Brand: FARONICS Pages: 30

GForce M-Tron Pro

Brand: M-Audio Pages: 4

DRUM AND BASS RIG

Brand: M-Audio Pages: 3

ILLUSTRATOR CS2 12.0.1

Brand: Adobe Pages: 6

Brand: Adobe Pages: 8

38043740 - ColdFusion Standard - Mac

Brand: Adobe Pages: 87

38039927 - Fireworks CS3 - PC

Brand: Adobe Pages: 369

Brand: Adobe Pages: 478

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands