manualshive.com logo in svg

Extreme Networks Ridgeline 3.0, Manual

Introducing Extreme Networks Ridgeline 3.0 – the ultimate network management solution. With our comprehensive user manual, available for free download at manualshive.com, you can unlock the full potential of this cutting-edge product. Take control of your network like never before with our easy-to-follow manual, ensuring seamless connectivity and maximum efficiency.

Share
Download
background image

  

Ridgeline Concepts and Solutions Guide

4

Displaying VMAN Details ..............................................................................................................................141

Categorizing VLANs With Network Names ..........................................................................................................141

Creating a Network Name .............................................................................................................................141
Assigning VLANs to a Network Name...........................................................................................................142
Filtering the VLANs Table Based on Network Name ....................................................................................142

Chapter 11: Managing Virtual Machines .............................................................................................. 145

Overview ..............................................................................................................................................................145

Introduction to the XNV Feature....................................................................................................................145

VM Port Configuration............................................................................................................................145
VM Authentication Process ....................................................................................................................146

Ridgeline Authentication .................................................................................................................146
Network (VMMAP) Authentication ..................................................................................................146
Local Authentication .......................................................................................................................146

File Synchronization...............................................................................................................................146
Network Management and Inventory .....................................................................................................147

Example XNV Configuration .........................................................................................................................147

Managing the XNV Feature, VM Tracking............................................................................................................148

Limitations .....................................................................................................................................................148
Identifying VMMs and VMs ...........................................................................................................................149

Virtual Machine Manager Table .............................................................................................................149

Adding and Importing VMs ............................................................................................................................150
Editing VM Manager Settings........................................................................................................................151
Deleting a VM Manager ................................................................................................................................152
Enabling VM Tracking On a Switch...............................................................................................................152
Editing List of Devices and Ports ..................................................................................................................156

Policy Match Condition Combinations ..................................................................................................................159
Creating a Virtual-Port Profile...............................................................................................................................159
Attaching Policies, VPPs, and VMs ......................................................................................................................161

Attaching a VPP to a VM...............................................................................................................................162
Attaching a Policy to a VPP ..........................................................................................................................165

Detaching VPPs ...................................................................................................................................................167

Detaching a VPP from a VM .........................................................................................................................167
Detaching a VPP from a Policy .....................................................................................................................168

Viewing Information on the VMs Tab....................................................................................................................169

All Table and All Map Views..........................................................................................................................169
Device Group/Subgroup Views .....................................................................................................................171
VM Details View ............................................................................................................................................172

VM Properties view ................................................................................................................................172
NIC Tab..................................................................................................................................................173
History Tab-VM Movement History ........................................................................................................173

Device Details with VM Monitoring................................................................................................................174
VM Monitoring Audit Log ...............................................................................................................................175

Chapter 12: Managing Your EAPS Configuration ............................................................................... 177

Configuring EAPS ................................................................................................................................................177

Creating an EAPS Domain............................................................................................................................178
Modifying an EAPS Domain ..........................................................................................................................179

Creating a Shared Link ..........................................................................................................................180

Deleting an EAPS Domain ............................................................................................................................180

Viewing EAPS Information ...................................................................................................................................181

The EAPS Map View.....................................................................................................................................182

EAPS Node Icons ..................................................................................................................................182
Link Status .............................................................................................................................................183

Displaying EAPS Domain Details .........................................................................................................................184

Displaying EAPS Details for a Selected Device ............................................................................................184

Summary of Contents for Ridgeline 3.0

























































































































































































































































































































































































Reviews:

No comments

Related manuals for Ridgeline 3.0

NEC Versa LX Important Information preview
Versa LX
Brand: NEC Pages: 4
3Com 3C16120 - SuperStack 3 Server Load Balancer Release Note preview
3C16120 - SuperStack 3 Server Load Balancer
Brand: 3Com Pages: 20
F-SECURE MOBILE SECURITY FOR WINDOWS MOBILE - Quick Manual preview
MOBILE SECURITY FOR WINDOWS MOBILE -
Brand: F-SECURE Pages: 4
F-SECURE MOBILE SECURITY FOR UIQ - Quick Manual preview
MOBILE SECURITY FOR UIQ -
Brand: F-SECURE Pages: 3
F-SECURE MOBILE SECURITY 6 FOR WINDOWS MOBILE - Quick Manual preview
MOBILE SECURITY 6 FOR WINDOWS MOBILE -
Brand: F-SECURE Pages: 5
F-SECURE MOBILE SECURITY 6 FOR S60 - Quick Manual preview
MOBILE SECURITY 6 FOR S60 -
Brand: F-SECURE Pages: 5
F-SECURE CLIENT SECURITY 7.00 Administrator'S Manual preview
CLIENT SECURITY 7.00
Brand: F-SECURE Pages: 315
F-SECURE ANTI-VIRUS FOR MICROSOFT EXCHANGE 9.00 Deployment Manual preview
ANTI-VIRUS FOR MICROSOFT EXCHANGE 9.00
Brand: F-SECURE Pages: 115
F-SECURE ANTI-VIRUS FOR MICROSOFT EXCHANGE 8.00 - Administrator'S Manual preview
ANTI-VIRUS FOR MICROSOFT EXCHANGE 8.00 -
Brand: F-SECURE Pages: 349
F-SECURE ANTI-VIRUS - FOR MICROSOFT EXCHANGE Administrator'S Manual preview
ANTI-VIRUS - FOR MICROSOFT EXCHANGE
Brand: F-SECURE Pages: 224
F-SECURE ONLINE BACKUP - HELP Manual preview
ONLINE BACKUP - HELP
Brand: F-SECURE Pages: 20
F-SECURE Mobile Anti-Virus 60 Series User Manual preview
Mobile Anti-Virus 60 Series
Brand: F-SECURE Pages: 90
TC Electronic VSS3 Manual preview
VSS3
Brand: TC Electronic Pages: 22
Polycom Conference Composer User Manual preview
Conference Composer
Brand: Polycom Pages: 29
I.R.I.S. CARDIRIS 5 Getting Started Manual preview
CARDIRIS 5
Brand: I.R.I.S. Pages: 10
I.R.I.S. IRISPOWERSCAN 9.0 User Manual preview
IRISPOWERSCAN 9.0
Brand: I.R.I.S. Pages: 153
A&D WinCT-Plus Instruction Manual preview
WinCT-Plus
Brand: A&D Pages: 36
UNIBLUE PowerSuite 2010 Product Manual preview
PowerSuite 2010
Brand: UNIBLUE Pages: 13

Brands by name

Popular brands

Load more brands