Extreme Networks Ridgeline 3.0 Manual Download Page 269

Page: 269 / 376

Ridgeline Concepts and Solutions Guide

267

●

Can have a maximum of 32 characters.

●

Can contain only alphabetic characters, numerals, hyphens, and underscores. All other special
characters are invalid.

●

Cannot have spaces.

●

Cannot begin with a numeral.

●

Cannot be assigned an existing name.

●

Cannot be authenticated and unauthenticated.

If you do not use these conventions, the Invalid input dialog box opens. To review the rules for
naming, click Details.

Figure 219: Create a New Role—Match Criteria

To establish match criteria for a role, choose a condition from the drop down list in the dialog box.
The conditions are:

●

Location

●

Company

●

Country

●

Department

●

Employee ID

●

State

●

Title

●

E-mail

Summary of Contents for Ridgeline 3.0

























































































































































































































































































































































































Search results

Summary of Contents for Ridgeline 3.0

Reviews:

Related manuals for Ridgeline 3.0

Brands by name

Popular brands

Extreme Networks Ridgeline 3.0, Manual

Search results

Summary of Contents for Ridgeline 3.0

Reviews:

Related manuals for Ridgeline 3.0

Brands by name

Popular brands