Extreme Networks e" series, Hardware Installation Manual

Page: 146 / 394

146 Extreme Networks Consolidated "e" and "i" Series Hardware Installation Guide
Alpine 3800 Series Switch Models
Figure 78: Rear panel of the Alpine 3804 switch
The rear panel of the Alpine 3804 switch provides:
• Access to the power supply
• Chassis grounding points
• System label, which includes:
— Chassis serial number
— Ethernet MAC address of the switch
— Symbols of safety certification
Alpine 3802 Switch
The Alpine 3802 switch consists of the following components:
• One 3-slot chassis, 4 U high, with backplane
• Three I/O module slots, labeled slots 1 through 3
• One integrated management module
• One or two preinstalled power supplies, either AC or DC
• One built-in fan tray containing three fan units; this fan tray is not customer-serviceable.
• One connector for an electrostatic discharge (ESD) wrist strap
• Six light emitting diodes (LEDs)
CAUTION
The Alpine 3802 switch has an integrated Switch Management Module (SMMi). The integrated Switch
Management Module is not hot-swappable or user removable. Do not attempt to remove the integrated
Switch Management Module. Contact Extreme Networks Customer Support if you experience problems.
38_rear4-b
V Hz A
100-120
200-240
50
60
13
6
V Hz A
100-120
200-240 50
60 13
6
SLIDE TO REMO VE
45012
SERVICE
DC OK
DC OK
WHEN INST ALLED IN 3808 THIS W A Y UP
WHEN INSTALLED IN 3804 THIS WAY UP
Blank for
second
power
supply
Power
supply
Grounding
points Label