Extreme Networks e" series, Hardware Installation Manual

Page: 195 / 394

Configuring I/O Modules
Extreme Networks Consolidated "e" and "i" Series Hardware Installation Guide 195
FM-32Ti Module
Figure 110 shows the FM-32Ti module.
Figure 110: FM-32Ti module
The FM-32Ti module has 32 10/100 Mpbs autonegotiating Ethernet ports using standard RJ-45
connectors. The FM-32Ti module supports autonegotitation of 10BASE-T and 100BASE-TX.
The default configuration of the FM-32Ti module is as follows. All ports:
•
Are added to the default VLAN as untagged.
• Inherit the properties of the default VLAN (protocol type, VLANid, and so on).
•
Operate in autonegotiation mode.
LEDs
The FM-32Ti module has the following LEDs:
• Module status
• Port status
For information about the LEDs and their activity on the FM-32Ti module, see “I/O Module LEDs” on
page 202.
38_FM32T
Module status
LED
Port status LEDs 10/100 Mbps ports
16
32
13
29
12
28
9
25
8
24
5
21
4
20
1
17