Extreme Networks e" series, Hardware Installation Manual

Page: 140 / 394

140 Extreme Networks Consolidated "e" and "i" Series Hardware Installation Guide
Alpine 3800 Series Switch Models
• Console (RS-232) port for accessing the CLI
• Dedicated 10BASE-T/100BASE-TX port for out-of-band management using CLI, ExtremeWare Vista,
or SNMP
Port Connections
The Alpine 3800 series switches support different port configurations on the different Alpine I/O
modules, as described in Table 24.
CAUTION
Modules that use SX, LX, and LX70 interfaces contain Class 1 laser devices. Invisible laser radiation
can occur when open. Avoid direct eye exposure to the beam.
1 The GM-4Xi supports 1000BASE-SX, 1000BASE-LX, and 1000BASE-LX70.
3 The GM-16X
3 supports 1000BASE-X.
4 The GM-16T
3
supports 10/100/1000BASE-T autonegotiation.
5 The FM-8Vi has eight internal loopback ports for rate shaping. Module supports 10BASE-S.
Power Supplies
The Alpine 3800 series switch supports the following types of power supplies:
• AC —Auto-sense for 110 and 220 VAC power
• DC—Requires -48 VDC nominal input line voltage
If two power supplies are installed in the switch, both installed power supplies must be of the same
type.
Table 24: Port configurations available on Alpine I/O modules
Ethernet Ports
Module
10BASE-T/
100BASE-TX 100BASE-TX/
1000BASE-T
GBIC 1000BASE-SX 100BASE-FX OTHER
GM-4Ti 4
GM-4Xi 4
1
GM-4Si 4
GM-16X
3
16 Mini-GBIC
3
GM-16T 3 16 4
FM-32Ti 32
FM-24Ti 24
FM-24SFi 24
FM-24MFi 24
FM-8Vi 8 VDSL
5
WM-4T1i 2 4 T1
WM-4E1i 2 4 E1
WM-1T3i 2 1 T3