Extreme Networks Alpine 3802, Hardware Installation Manual

Page: 96 / 394

96 Extreme Networks Consolidated "i" and "e" Series Hardware Installation Guide
Summit Switch Models
Reset Button
Use the reset button to cycle the switch down and bring the switch back up without powering off the
switch. Your saved switch configuration information is not lost; unsaved switch configurations are lost.
Use a non-conductive tool to push the reset button.
Console Port
Use the console port (9-pin, “D” type connector) for local management. This port allows you to attach a
terminal and access the CLI through a serial connection.
Modem Port
Use the modem port to connect a modem for remote access to the command line interface (CLI).
Ethernet Management Port
Use the management port (10/100 Mbps Ethernet, RJ-45 connector) to plug an Ethernet cable directly
from your laptop into the switch for out-of-band management. This provides you with direct access into
the switch and allows you to view and locally manage the switch configurations.
See “Management Ports” in Chapter 1 for more information about the management port.
PCMCIA Slot
The PCMCIA slot is reserved for future use.
Power Sockets
The Summit7i switch has built-in dual redundant power supplies. Each power supply has its own
power socket. When the second power supply is connected to a second independent power source, both
provide a redundant, load-shared power source to the Summit7i switch. If one of the power sources or
power supplies fails, the second power supply provides all power needs which ensures uninterrupted
network operation.
NOTE
Only trained personnel should provide service for Summit7i switch power supplies.
Label
The label on the rear of the Summit7i switch displays important information about the switch. Write
down the following information before you install the switch:
•
Model number—Model number assigned to this device
• Part number—Part number assigned to this device
•
Serial number—Manufacturing serial number for this device. Refer to the serial number when you
contact Extreme Networks technical support
• MAC address—Unique Ethernet MAC address assigned to this device.