Extreme Networks Alpine 3802, Hardware Installation Manual

Page: 67 / 394

Summit 300 “e” Series Switches
Extreme Networks Consolidated "i" and "e" Series Hardware Installation Guide 67
Figure 21 shows the front of the Summit 300-24 switch.
Figure 21: Summit 300-24 switch front view
The front panel of the Summit 300-24 switch includes LEDs, a console port, fixed 10/100 Mbps ports,
and high-speed uplink ports implemented as either a 10/100/1000 Mbps copper port or an installed
1000-BASEx mini-GBIC.
Figure 22 shows the rear of the Summit 300-24 switch.
Figure 22: Summit 300-24 switch rear view
The rear panel of the Summit 300-24 switch provides air circulation vents, an AC power socket, a
system label, and a redundant power connector. The AC power connector provides power to the switch
when a power cable is connected. The system label provides the manufacturing serial number the
unique Ethernet MAC address that is assigned to this device. Use the serial number for fault reporting.
The redundant power connector allows you to connect a redundant power supply to provide redundant
support for the Power over Ethernet (PoE) functions of the switch. For more information about the
redundant power supply, see “Redundant Power Supply” on page 70. For connector pinouts, see
“Pinouts for Summit 300-24 switch redundant power connector” on page 337
Summit 300-24 Switch LEDs
The LED activity on the Summit 300-24 is described in Table 12.
RVN24001A
10/100 Mbps ports Console
port
Mini-GBIC
port status LEDs
Management
LED
PSU LEDs
Fan LED
Mini-GBIC/
1000-baseX ports 10/100/1000-baseT ports
Slot for key
RVN24002
Power socket Redundant
power cable