Evinrude E-tec 75 HP, Service Manual

Page: 95 / 344

95
ENGINE MANAGEMENT MODULE (EMM)
EMM DIAGNOSTICS
4
Program Information
Static Information
Refers to information viewed when the outboard is
NOT running. This includes manufacturing infor-
mation.
The outboard model and serial numbers displayed
on the
Identity
screen must match the identifica-
tion label on the outboard swivel bracket.
The serial number and cylinder location displayed
on the
Injector Coefficients
screen must indicate
the correct cylinder placement for all injectors.
Dynamic Information
Refers to specific information viewed while the
outboard is running. Dynamic information updates
quickly and allows the viewer to monitor voltage
changes. The displayed information can be used
for troubleshooting and checking outboard infor-
mation.
Service Codes (Faults)
Service codes are fault conditions the
EMM
has
identified. A service code may be stored as a
result of some unidentified problem or condition. If
no codes are displayed, the engine has no stored
service codes.
Stored Faults
A stored service code represents a previous event
or condition. Service codes are stored if they
occur while the outboard is running.
The
Stored Faults
screen of the diagnostic pro-
gram shows the code number, the number of
Identity Screen 005163
Injector Coefficients Screen 005164
Engine Monitor Screen 006307