EVCO S.p.A.
EVDRIVE04 | User manual ver. 1.1 | Code 144EPD4I114
Page 37 of 78
CAN network configuration and status pages
Modbus on RS485 configuration page
USB status page
Password setting page
Diagnostic page
Internal status
RS485 status
7.5
Connecting the device through the set-up software
system Parameters Manager
The following procedure shows how to connect the device to the set-up software system Parameters Manager.
For further information please consult the application manual of Parameters Manager.
Operate as follows:
1.
To connect the device to the set-up software system Parameters Manager through the USB port, make sure to
have an USB cable; to connect the device to the set-up software system Parameters Manager through the
RS-485 port, make sure to have the non optoisolated RS-485/USB serial interface EVIF20SUXI.
2.
Switch off the power supply of the device.
3.
Connect the kit (or the interface) to the Personal Computer.
