Eurotech ZyWAN, User Manual

Page: 100 / 130

ZyWAN - User Manual
100 110150-1001F
Chapter 9 Terminal Servers
The following screen capture shows the Terminal Servers tab.
The Terminal Server sets up a listening port for inbound TCP/IP connection, allowing communication directly
to a local serial port.
After setting all the Terminal Server properties, click the Submit New Configuration button before switching
to a new tab or closing the window.
Note:
Changes made to the Terminal Server page take effect immediately after submitting
changes without requiring a reboot.
To allow one or more Terminal Server services to be configured, set Enable Terminal Servers to Yes . This
makes the items shown in the following screen capture available in the Table of Terminal Servers .
The following table lists the buttons available in the Table of Terminal Servers .
BUTTON EXPLANATION
Insert Row# Each of the Terminal Servers exists as a large set of properties
in a numbered table row. In order to insert a row in the table,
enter a number in the box between 1 and one greater than the
highest number of rows. Then click the Insert Row# button to
insert a blank row. This row must be filled in with all data
required.
Delete Row# In order to delete a Terminal Server configuration (a row in the
table), enter a number in the box between 1 and the highest
number of rows. Then click the Delete Row# button to delete
the row. Once a row is deleted, it cannot be restored without
inserting a row and entering the data again.