ZyWAN - User Manual
90
110150-1001F
The
Enable
options determine which NMEA messages are sent through the network port. The following
table describes these options.
OPTION
EXPLANATION
Enable GPGLL?
Select
Yes
to enable the
GPGLL
message in the NMEA data
stream.
Enable GPGGA?
Select
Yes
to enable the
GPGGA
message in the NMEA data
stream.
Enable GPVTG?
Select
Yes
to enable the
GPVTG
message in the NMEA data
stream.
Enable GPRMC?
Select
Yes
to enable the
GPRMC
message in the NMEA data
stream.
Enable GPGSA?
Select
Yes
to enable the
GPGSA
message in the NMEA data
stream.
Enable GPGSV?
Select
Yes
to enable the
GPGSV
message in the NMEA data
stream.
Enable PFST,FOM?
Select
Yes
to enable the
PFST
and
FOM
messages in the
NMEA data stream.
GPS UDP Message Format
The following screen capture shows the window if
GPS UDP Message Format?
is set to
Arcom Format
or
ActSoft Format
.
Note:
If the GPS UDP option is configured here, its UDP server port must also be included in
the “Open Ports” section of the
Networking
page as UDP, so the firewall will allow
acknowledgements to be sent back to the ZyWAN. This is required for the
Actsoft
Format
mode, and for
Arcom Format
where the “Enable Cache” option is set to
Yes
.
Summary of Contents for ZyWAN
