Eurotech ZyWAN, User Manual

Page: 127 / 130

Appendix
127 110150-1001F
A.2. Electromagnetic Compatibility (EMC)
The ZyWAN is classified as a component with regard to the European Community EMC regulations, and it is
the user’s responsibility to ensure that systems using the product are compliant with the appropriate EMC
standards.
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to
Part 15 of the FCC Rules and European Community EMC regulations. These limits are designed to provide
reasonable protection against harmful interference in a residential installation. This equipment generates,
uses, and can radiate radio frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications. However, there is no guarantee that
interference will not occur in a particular installation. If this equipment does cause harmful interference to
radio or television reception, which can be determined by turning the equipment off and on, the user is
encouraged to try to correct the interference by one of the following measures:
1. Reorient or relocate the receiving antenna.
2. Use shielded RJ-45 cables for the Ethernet connections.
3. Increase the separation between the equipment and receiver.
4. Connect the equipment into an outlet on a circuit different from that to which the receiver is
connected.
5. Consult the dealer or an experienced radio/TV technician for help.
Radio Frequency Requirements
This device complies with Part 15 of FCC Rules. Operation is subject to the following conditions:
1. This device may not cause harmful interference.
2. This device must accept any interference received, including interference that may cause undesired
operation.
3. To comply with RF safety requirements, you must maintain a distance of 20 cm from the antenna
when operating the device.
4. Each antenna of this device must not be co-located with (within 20 cm of) any other antenna or
transmitter. Antenna requirements are listed in the FCC grant information for each module given in
the next sections.
Changes or modifications to the product not expressly approved by Eurotech could void the user’s authority
to operate the equipment.
Radio Frequency Standards for ZyWAN-EVDO (MC5725, MC5727)
FCC ID: UFNZEUSMC5725
FCC grant information: Modular Approval for use as a module in mobile-only exposure conditions, antenna
gain including cable loss must not exceed 5.1dBi in cellular band and 4.15dBi in PCS band, for purposes of
2.1043 and 2.1091. The antenna(s) used for this transmitter must be installed to provide a separation
distance of at least 20 cm from all persons. The antenna(s) used for this transmitter must not be co-located
or operating in conjunction with any other antenna or transmitter within a host device.
Radio Frequency Standards for ZyWAN-3G (MC8775)
FCC ID: UFNZEUSMC8775
FCC grant information: This device is approved for mobile RF exposure conditions. Approved for use with
antenna(s) as listed in this filing. The antenna(s) used for this transmitter must be installed to provide a
separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction
with any other antenna or transmitter.