Eurotech ZyWAN, User Manual

Page: 108 / 130

ZyWAN - User Manual
108 110150-1001F
Once the reboot (or reboots) are finished, the system has been updated to version 1.5. This can be verified
on the Web configuration page or by typing the command
cat /home/arcom/version.txt
(the response
should be ‘5’). Proceed to the next section in order to install further updates.
Starting with version 1.5
If the ZyWAN is currently at version 1.5, the following file is needed:
Zywan-1.5to1.7update.tar
Use WinSCP to connect to the ZyWAN, and browse to its
/tmp/
(or
/var/tmp/
) folder. Download the
“Zywan-1.5to1.7update.tar” file to the ZyWAN as shown in the following screen capture.
After the files are loaded, connect to the ZyWAN using either HyperTerminal on the COM1 diagnostics port
or over the network using PuTTY (or another SSH application). See the section Setting Up Software on
page 25 , for help setting up HyperTerminal or PuTTY.
From the ZyWAN command line, issue the following commands:
cd /var/www/updates
tar xvf /tmp/Zywan-1.5to1.7update.tar
touch /tmp/update.log
tail -f /tmp/update.log &
(Notice the ampersand ‘&’ at the end.)
touch /tmp/update