ZyWAN - User Manual
80
110150-1001F
The following table lists the fields and options available in the
DHCP Server Configuration
table.
FIELD/OPTION
EXPLANATION
Default Lease Time
Enter the
Default Lease Time
(in seconds) for the assigned
DHCP lease to expire. The default time is the time assigned if
the client does not request a specific lease time.
Max. Lease Time
Enter the maximum lease time (in seconds). This is the
maximum lease time which is assigned, regardless of whether
the client has requested a longer lease time.
Subnet Mask
Enter the
Subnet Mask
defining the range of network addresses
to be assigned by this DHCP server. Each of the four fields
must be a number between 0 and 255.
Range From
Enter the numeric address of the lowest DHCP address to be
assigned by this DHCP server. Each of the four fields must be a
number between 1 and 254.
Range To
Enter the numeric address of the highest DHCP address to be
assigned by this DHCP server. Each of the four fields must be a
number between 1 and 254, greater than the
Range From
.
Pass DNS Servers to
DHCP Clients
Set this option to
Yes
if the ZyWAN should act as a DNS proxy
server on the network. The ZyWAN will pass requests to
whatever DNS server is assigned on its default route, and will
pass the responses back to the requesting client.
Note:
If the
Run Dhcp Server
option is set to
Yes
, then UDP port 67 must be included in the
“Open Ports” section of the
Networking
page.
If
Pass DNS servers to DHCP clients
is set to
Yes
, UDP port 53 must be included in
“Open Ports” section of the
Networking
page.
Summary of Contents for ZyWAN
