Eurotech ZyWAN, User Manual

Page: 31 / 130

PART 1: GETTING STARTED
31 110150-1001F
3. Set Up the Network
The PC must be set up to obtain its network address from the ZyWAN for this test. After initial configuration
of the ZyWAN, the PC can be changed back to its normal network settings.
To configure the network as mentioned previously, complete the following steps:
1. In the Windows Start menu, select Control Panel > Network Connections . Look at the properties of
the Local Area Connection .
2. Open the properties for the Internet Protocol (TCP/IP) . Select the Obtain an IP address
automatically and Obtain DNS Server address automatically checkboxes as shown in the following
screen capture.
3. Record the existing settings, then make the changes to obtain the IP address and DNS server
automatically.
4. Click OK to close the Local Area Connection properties, and reboot the PC if prompted to do so.