8
INSTALLING BATTERIES
CAUTION: USE PROTECTIVE GLOVES AND GOGGLES WHEN HANDLING BATTERIES, AVOIDING
ANY CONTACT WITH THE ACID INSIDE THE BATTERIES.
CAUTION: THE MACHINE'S CONTROL BOARD AND BATTERY CHARGER COME OFF THE
ASSEMBLY LINE CONFIGURED FOR USE WITH LEAD ACID BATTERIES.
IF GEL BATTERIES OR AGM BATTERIES ARE USED, THE MACHINE’S CONTROL BOARD AND THE
BATTERY CHARGER MUST BE SET. CONTACT A RESELLER OR A TECHNICIAN BEFORE MOUNTING
THESE TYPES OF BATTERIES.
Refer to the specification sheet for battery types and sizes suitable for the machine.
1
2
3
4
5
Follow the instructions below to mount the
batteries on the machine:
park the machine on a flat surface, put on the
brake and remove the key;
open the hood of the seat (pos. 1) by
releasing the special safety hook (pos 2);
remove the nut pos.5;
unplug the seat safety device cables (pos 7);
remove the 3 screws pos. 3
Lift the hood pos.1
.
1
2
Remove the 2 screws pos.1;
Remove the battery hood pos.2.
