27
PERIODIC SERVICE
INTRODUCTION
REGULAR AND PERIODIC SERVICING OF YOUR SCRUBBER GUARANTEES OUTSTANDING PERFORMANCE OF THE
MACHINE AND ITS LONG LIFE. THE PAGES THAT FOLLOW CONTAIN THE INFORMATION THAT WILL HELP TO
PLAN THE CARE AND THE SERVICING THAT THE SCRUBBER NEEDS.
WARNING!
DO NOT CARRY OUT ANY MAINTENANCE OPERATION NEITHER ON THE MACHINE NOR ON ITS COMPONENTS
WITHOUT HAVING FIRST STOPPED THE MACHINE, ENGAGED THE PARKING BRAKE, BLOCKED OFF THE WHEELS
AND DISCONNECTED THE STARTING BATTERY CONNECTORS.
WARNING!
DO NOT TAMPER WITH ANY SAFETY-RELATED PART.
THESE CAN BE REMOVED ONLY AS PART OF THE MAINTENANCE OF AN AUTHORISED SERVICE CENTRE.
DRAINING AND CLEANING THE RECOVERY TANK
1
2
3
4
5
6
7
8
9
10 11
12
The recovery tank must be drained and cleaned after each washing operation.
In order to drain and wash the tank proceed as follows:
Turn off the washing function using the ON/OFF button and go to the tank drainage area ;
Turn off the machine, remove the key and put on the brake.
Open the hood of the seat pos. 1 by releasing the special safety hook;
Open the tank lid pos. 2 by lifting it manually till the safety bar pos. 8 gets inserted
;
Remove the safety filter for bigger debris (pos. 3 by holding it from its upper part and pulling it out of the tank. Empty
the filter in an appropriate dirt container. Wash the filter with water and remove the pieces which have got stuck
through the meshes of the net, if there are any.
Remove the drain pipe from the dirty water tank (pos6) and while keeping the pipe vertically (pos 5) open the lid by
rotating it counterclockwise as indicated by the arrow. Part of the pipe is flexible (pos 7) and therefore it can be
squeezed to limit the water flow. Once opened, lay the pipe on the ground.
After draining the tank, make sure to clean it thoroughly using water.
If necessary, for cleaning use the hatch (pos.8)
removing the cap (pos. 9).
Wash the ECO-SYSTEM filter (pos.11) using water throughout the filter, paying attention not to damage it.
