29
DRAINING AND CLEANING THE SOLUTION TANK
1
2
3
4
5
6
7
The recovery tank must be drained after each washing operation. In order to drain and wash the tank proceed as follow:
Turn off the washing function using the ON/OFF button and go to the tank drainage
area;
Turn off the machine, remove the key and put on the brake.
Remove the drain pipe from the clean water tank (position 6) and while keeping the pipe vertically (position 5) open
the lid by rotating it counterclockwise as indicated by the arrow. Part of the pipe is flexible (position 7) and therefore it
can be squeezed to limit the water flow. Once opened, lay the pipe on the ground slowly.
After completing the cleaning procedures, open the hood of the seat pos. 2, by releasing the special safety hook pos. 1;
Open the solution tank (pos. 3) using the switch provided.
Unscrew the cap pos.4 and remove it;
Wash the tank with water by means of a rubber pipe, trying to direct the water flow towards the interior of the machine
as to clean it completely.
Once completing the cleaning procedures, close the cap pos. 4, as well as the dirty solution tank pos.3, and the hood of
the seat pos. 2 and place the drain pipe pos.6 with its cap pos. 5 into its housing.
