37
GREASING POINTS
1
2
2
Every 100 hours, grease points A and B shown
at POINTS 1 and 2.
POINT 1 - Squeegee rotation pin: fill lubricators
(pos. A) using a lubrication pump.
POINT 2 - RIGHT and LEFT wheel brake pin:
Remove the 2 screws (pos. 3);
Remove the protection guard (pos. 4);
Using a lubrication pump, fill the
lubricator (pos. B).
Fit everything back together again.
Repeat the operation on the brake pin of the
LEFT wheel.
1
2
A
A
3
4
B
CONTROLLO E SOSTITUZIONE OLIO SU MOTORIDUTTORE
AVANZAMENTO
1
2
OPERATIONS TO BE CARRIED OUT ONCE EVERY 500
WORKING HOURS AS TO CHECK THE OIL LEVEL OF THE
DRIVE WHEEL REDUCER:
1)
Check the oil level by removing the level/oil cap (Pos.1)
2)
If necessary, fill up the wheel reducer with SYNTHETIC OR
MINERAL OIL SAE 80W90 up to the level and then refit the cap
(Pos.1).
OPERATIONS TO BE CARRIED OUT ONCE EVERY 2000
WORKING HOURS AS TO REPLACE THE OIL OF THE DRIVE
WHEEL REDUCER
1)
Unscrew and remove the level/oil filling cap (Pos.2)
;
2)
Fit a suitable basin for the oil gathering. Then, unscrew the drain
plug Pos 1 and remove it as to wait for the oil outflow;
3)
Remove any metallic waste which got stuck on the drain plug
;
4)
Refit the drain plug Pos.1 by means of a proper gasket;
Fill up the reducer with SYNTHETIC OR MINERAL OIL SAE
80W90 up to the level and then refit the oil filling cap (Pos.2).
