eta GRATUSSINO Bravo, Instructions For Use Manual

Page: 57 / 104

3) Whipping/mixing whisks and kneading hook C1, C2, C3
Immediately after use, wash the attachments in hot water with a detergent and let dry out. C1
- C3 parts may be washed in dishwasher.
4) Mincer D
Immediately after use, wash the attachments in hot water with a detergent and let dry out.
After washing and drying the components, we recommend applying cooking oil on blades,
knives and exchangeable discs. For easier cleaning of mincer, mince a piece of hard
pastry (e.g. a croissant or a bun) at the end. Never wash D0 - D8 in a dishwasher, because
detergents can cause their darkening or corrosion!
5) Grating/slicing adapters E
Immediately after use, wash the attachments in hot water with a detergent and let dry out.
Never wash E1 - E4 in a dishwasher!
6) Fruits, berries and vegetables press J
Immediately after use, wash the attachments in hot water with a detergent and let dry out.
You can easily clean the sieve with the attached brush, however proceed carefully not to
damage the sieve. Never wash the grinder body, sieve or nut in a dishwasher!
Sealing replacement procedure
Proceed according to Fig. 10. If the sealing J8 is worn or damaged, replace it with a new
one (of identical type).
7) Blender G
Immediately after use, wash the attachments in hot water with a detergent and let dry out.
Knife cleaning procedure: pour about 0.5 l of clear water in the container, switch on the
appliance and remove the impurities by several pulses. In the case of larger amount of
impurities, repeat the procedure several times, or pour 1 litre of water, add a small amount of
detergent and switch on the blender for 1 minute.
8) Poppy seed grinder H
Immediately after use, wash the attachments in hot water with a detergent and let dry out.
Proceed with maximum attention when cleaning the grinding discs! Avoid getting the
grinding edges/grooves in contact with hard items, which would blunt them and thereby
reduce their effectiveness. After washing and drying the components, we recommend
applying cooking oil on the grinding and pressure discs. Wipe the feeder H1 with a damp
cloth. Do not immerse into water – avoid water getting in the internal components!
VI. STORAGE
Store the properly cleaned appliance including all accessories and attachments at a dry,
dustless and safe place, out of reach of children and incapacitated persons.
VII. ENVIRONMENT
If the dimensions allow, there are marks of materials used for production of packing,
components and accessories as well as their recycling on all parts. The symbols specifi
ed on the product or in the accompanying documentation mean that the used electrical or
electronic products must not be disposed of together with municipal waste.
GB
57 / 97