eta GRATUSSINO Bravo, Instructions For Use Manual

Page: 44 / 104

– When the appliance is in operation, prevent pets, plants or insects to get in contact with it.
– The product is intended for home use and similar (in shops, offices and similar workplaces,
in hotels, motels and other residential environments, in facilities providing accommodation
with breakfast). It is not intended for commercial use!
– This appliance is not intended for outdoor use.
– Do not place any objects on the top of the appliance.
– Watch the appliance for the entire time of food processing!
– Always use only one function of the appliance, never turn on several functions at the same
time (e.g. processing food in the bowl B1 and at the same time in the meat mout A4 ).
–
Never submerge the appliance under water and do not wash under running water!
– The appliance must not be used in damp or wet environment and in any environment with
the danger of fire or explosion (
spaces where chemicals, fuels, oils, gases, paints and
other flammable or volatile materials are stored ).
– Do not leave the appliance in operation without supervision and supervise it for the entire
time that food is being prepared!
– Do not use safety lock controlled by the blender cover A9 for switching off the appliance!
– It is not allowed to modify the surface of the appliance in any way (e.g. using
a selfadhesive wallpaper, foils , etc.)!
– Use the appliance only in the working position in places, where there is no risk of it being
knocked over and at a sufficient distance from sources of heat (e.g. fire stoves, electric/
gas stoves, cookers , etc.), and wet surfaces ( kitchen sinks, wash basins etc.).
– Your foot processor is fitted with an electronic speed sensor control that is designed to
maintain the speed under different load conditions. You may therefore hear some variation
in speed during the operation as the foot processor adjusts to the load and speed selected
- this is normal.
– The appliance is equipped with thermal safety fuse which disconnects current supply incase
of engine overloading. If it occurs, unplug the appliance and let the appliance getcooled.
– Before preparation, remove possible packages from food (e.g. paper, a PE bag , etc.).
– Do not turn on the appliance without any ingredients inside!
– Use the appliance only with accessories designed for this model. The use of other
accessories may present a danger for the user.
– When mixing or blending liquids, never use a greater volume than is recommended.
– Do not insert accessories into any body cavities.
– Do not exceed the maximum time of uninterrupted operation of the appliance as specified
for the respective attachments in the table. Never exceed the total time of 30 minutes of
uninterrupted operation. Then let the food processor cool down for at least 30 minutes.
– Before removing the filling opening cover, allow the rotating parts to stop completely.
– Never put fingers into the feeding hole or use a fork, knife, spatula, spoon etc. to do so.
– Due to safety it is not possible to change the attachments while the drive unit is in operation.
– Make sure hair and loose pieces of clothing do not get into the attachments or into the
rotating drive to avoid risk of them tangling up in the mixing blade or the rotating drive itself.
– Before removing the extra attachment from the drive unit, allow the rotating parts to stop
completely.
– If the processed foods start to stick to the accessories (e.g. on the beather or the whisk
or the kneading hook ), turn off the appliance and carefully clean the accessories
(e.g. with a spatula ).
– Never assemble accessories on the top of the drive unit (outside accessorie J )!
– When mounting or removing the bowl, do not apply much pressure on the bowl handle.
– Before connecting the appliance to the mains, make sure it is turned off.
44
GB
/ 97