eta GRATUSSINO Bravo, Instructions For Use Manual

Page: 46 / 104

III.1) Food processor (A)
Description (fig. 1)
A1 – Multifunctional head release lever A6 – Removable cover
A2 – Speed regulating knob A7 – Multifunctional head
A3 – Bottom mount for adapters C1 - C3 A8 – Power cord
A4 – Front mount for attachments D , E , J , H A9 – Removable cover
A5 – Release button A10 – Blender mount G
A11 – Light signaling
B1 – Stainless bowl B3 – Filling funnel
B2 – Bowl lid
The model you purchased includes the attachments and adaptors specified in the
table at the end of this language version of the manual . Components A9 , A10 , A11 only
for type ETA 0023/70 , ETA 0023/80 .
Food processor control
– Tilting the multifunctional head downward/upward (Fig. 2)
Rotating the release lever A1 slightly will lift the head upward. Rotating the lever A1 further
and pushing the unit down will tilt the head downward.
– On/off switching of the food processor
Before you switch on the food processor, plug the A8 power cord into electric socket.
Then switch on the food processor by rotating the speed regulating knob A2 . After you finish
working, switch off the food processor by rotating the speed regulating knob to position OFF .
– Speed control (Fig. 5)
Speed is controlled by setting the speed regulating knob A2 to the desired position within
the interval MIN - 1 - 2 - 3 - 4 - 5 - 6 - MAX . For short operation time at the maximum
speed, the regulating knob can be set to position “ P ” (PULSE). The regulating knob must
be held by hand in this position. Releasing the regulating knob will return it to position
OFF and stop rotating.
– Multifunctional head attachment security safeguard
In order to disassemble the food processor and to remove the attachments from A4 front
mount for attachments, apply a reverse procedure. Before removing the attachments from
the motor unit head, you first have to push the release button A5 .
– Blender security safeguard
The food processor cannot be switched on, if the blender cover A9 is removed, and the
blender is not correctly fixed.
– Light signalization A11
Blinking (flashing) in green – components are unsecured or incorrectly assembled.
Permanent green light – components are correctly assembled and secured / Stand-by
mode / function.
Food processing time depends on the volume, type and quality of the processed
ingredients. It usually takes several minutes under normal conditions.
46
GB
/ 97