Erbe 20416-032, Manual

Page: 24 / 268

24
4. To collect the sample, deactivate the cryosurgical unit’s
freeze function and allow the instrument to thaw completely
(e.g. dipped in a sample container filled with liquid).
5. Remove the instrument from the endoscope. Make sure that
the angle of the endoscope is not too steep and the probe is
not clamped.
5.5 Disconnecting the product from the unit
1. Unscrew the cryoprobe from the connecting adapter (Art. No.
20416-034).
2. Screw the protective cap onto the probe coupling.
5.6 Precleaning the product in the procedure room
1. Use a soft cloth (such as a compress) to remove any obvious
contamination immediately after use and/or place the prod-
uct in deionized water.
6
Cleaning, disinfection, sterilization
6.1 Safety instructions
May be cleaned in an ultrasonic bath.
On no account use sharp or abrasive objects for cleaning purpos-
es.
The probe coupling must remain sealed during the entire prepa-
ration process with the protective cap. Moisture penetrating into
the tubing system causes malfunctions.
Only roll up the application element loosely; do not kink or crimp
it.
Only roll up the connection hose loosely; do not kink or crimp it.
OBJ_DOKU-181800-009.fm Seite 24 Freitag, 14. Juni 2019 6:50 06