
Related tasks
Changing Automatic Update Options
Product Status Messages
You can often diagnose problems with your product by checking the messages on its LCD screen. You
can also press the
? Help
button to view help topics.
LCD screen message
Condition/solution
Paper out
No paper is loaded. Load paper in the product.
Paper jam
Paper is jammed in the product. Remove the jammed paper, then press one
of the
Start
buttons or the
On
button as instructed on the screen.
Cannot recognize
There is a problem with originals placed on the product. Check to make sure
photos. Make sure
they are placed correctly and repeat the operation.
photos are placed
correctly.
The combination of IP
There is a problem with the network connection to your product.
address and subnet
mask is invalid.
A printer's ink pad is at
The ink pad is at the end of its service life. Turn off the product and contact
the end of its service life. Epson for support.
A printer's ink pad is
The ink pads are near the end of their service life. Contact Epson for support.
nearing the end of its
(To continue printing, press one of the
Start
buttons.)
service life.
Communication error
Make sure the computer is connected to your product and your software is
installed correctly.
No dial tone detected.
Make sure the phone cable is connected correctly and the phone line works.
Try Check Fax
If you connected the product to a PBX (Private Branch Exchange) phone line
Connection.
or Terminal Adapter, turn off the
Dial Tone Detection
setting.
Recovery mode
An error has occurred during firmware updating. Connect your product using
a USB cable and try updating the firmware again. If you still receive this error
message, contact Epson for support.
268
Summary of Contents for WorkForce 545
