Epson WF-C20600 User Manual Download Page 268

Page: 268 / 602

Code

Problem

Solution

130

Collated printing has failed due to a lack of available
memory.

Try the methods below to reduce the size of the print
job. If you do not want to use these methods, try
printing one copy at a time.

❏

Lower the print quality and the resolution.

❏

Change the format setting.

❏

Reduce the number of images, letters or fonts
used in the print job.

131

Reverse printing has failed due to a lack of available
memory.

If you want to print in reverse, try the following
methods to reduce the size of the print job.

❏

Lower the print quality and the resolution.

❏

Change the format setting.

❏

Reduce the number of images, letters or fonts
used in the print job.

132

Cannot print due to a lack of available memory.

Try the methods below to reduce the size of the print
data.

❏

Change to a smaller paper size.

❏

Simplify the data by reducing the number of
images in the print data or reducing the number
of font types.

133

Cannot print on 2-sides due to a lack of available
memory. Only one side will be printed.

Try the methods below to reduce the size of the print
data.

❏

Change to a smaller paper size.

❏

Simplify the data by reducing the number of
images in the print data or reducing the number
of font types.

141

Error in the printer's HDD. The job has been canceled.

Contact Epson support or an authorized Epson
service provider to replace the HDD.

151

Printing is not performed because the login user
name and the user name associated with the
confidential job do not match.

Make sure you login with the same user name as the
user name associated with the confidential job.

201

The memory is full.

❏

Print received faxes from

Job Status

Job/

Status

❏

Delete received faxes saved in the inbox from

Job

Status

Job/Status

❏

If you are sending a monochrome fax to a single
destination, you can send it by using Direct Send.

❏

Divide your originals in two or more to send them
in several batches.

202

The line was disconnected by the recipient machine.

Wait for a while and then try again.

Solving Problems

The Printer Does Not Work as Expected

Error Code is Displayed on the Status Menu

268

Summary of Contents for WF-C20600



























































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for WF-C20600

Reviews:

Related manuals for WF-C20600

Brands by name

Popular brands

Epson WF-C20600, User Manual

Search results

Summary of Contents for WF-C20600

Reviews:

Related manuals for WF-C20600

Brands by name

Popular brands