&
&
“Making Settings to Receive Faxes Operating Only a Connected Phone” on page 523
&
Making Settings for the Printer's Fax Features According to Use
You can configure the printer's fax features individually using the printer's control panel according to use. The
settings made using
Fax Setting Wizard
can also be changed. For more details, see the descriptions of the
Fax
Settings
menu.
Note:
❏
Using Web Config, you can configure the printer's fax features.
❏
When you use Web Config to display the
Fax Settings
menu, there may be slight differences in the user interface and in
location compared to the printer's control panel.
Related Information
&
“Fax Settings (Fax-Capable Printers Only)” on page 418
&
“Receiving Incoming Faxes” on page 152
&
“Making Settings for a PBX Phone System” on page 522
&
“Making Settings When You Connect a Phone Device” on page 523
&
“Making Settings to Save and Forward Received Faxes” on page 524
&
“Making Settings to Save and Forward Received Faxes with Specific Conditions” on page 527
&
“Making Settings for Blocking Junk Faxes” on page 531
&
“Making Settings to Send and Receive Faxes on a Computer” on page 531
Making Settings for a PBX Phone System
Make the following settings when using the printer in offices that use extensions and require external access codes,
such as 0 and 9, to get an outside line.
1.
Select
Settings
on the home screen.
2.
Select
General Settings
>
Fax Settings
>
Basic Settings
.
3.
Select
Line Type
, and then select
PBX
.
4.
When sending a fax to an outside fax number using # (hash) instead of the actual external access code, select
the
Access Code
box, and then select
Use
.
The # entered instead of the actual access code, is replaced with the stored access code when dialing. Using #
helps avoid connection problems when connecting to an outside line.
Note:
You cannot send faxes to recipients in
Contacts
in which an external access code such as 0 or 9 is set.
If you have registered recipients in
Contacts
using an external access code such as 0 or 9, set the
Access Code
to
Do Not
Use
. Otherwise, you must change the code to # in
Contacts
.
5.
Tap the
Access Code
input box, enter the external access code used for your phone system, and then tap OK.
>
>
Making Fax Features Available (Fax-Capable Printe
522
