Synchronizing the Date and Time with Time Server
When synchronizing with the time server (NTP server), you can synchronize the time of the printer and the
computer on the network. The time server may be operated within the organization or published on the Internet.
When using the CA certificate or Kerberos authentication, time-related trouble can be prevented by synchronizing
with the time server.
1.
Access Web Config and select the
Device Management
tab >
Date and Time
>
Time Server
.
2.
Select
Use
for
Use Time Server
.
3.
Enter the time server address for
Time Server Address
.
You can use IPv4, IPv6 or FQDN format. Enter 252 characters or less. If you do not specify this, leave it blank.
4.
Enter
Update Interval (min)
.
You can set up to 10,080 minutes by the minute.
5.
Click
OK
.
Note:
You can confirm the connection status with the time server on
Time Server Status
.
Setting the Default Value for Scanning,Copying and Sending Faxes. (User
Default Settings)
You can set the default value for the functions.
You can set the following functions.
❏
Scan to Network Folder/FTP
❏
Scan to Email
❏
Scan to Memory Device
❏
Scan to Cloud
❏
Copy
❏
Fax
1.
Access Web Config and select the functions for which you want to set the default value for the
Scan/Copy
tab
>
User Default Settings
.
Select the
Fax
tab >
User Default Settings
to set the default value for fax.
2.
Set each item.
3.
Click
OK
.
If the combination of the value is invalid, it is automatically modified, and then a valid value is set.
>
>
Making Basic Operation Settings for the Printer
534
