Erase All Memory
Erases all data on the hard disc. You cannot perform other operations or turn off the device during formatting.
❏
High Speed: Erases all data with a dedicated erase command.
❏
Overwrite: Erases all data with a dedicated erase command, and overwrites other data in all areas to erase all
data.
❏
Triple Overwrite: Erases all data with a dedicated erase command, and overwrites other data in all areas three
times to erase all data.
Making Settings for Sequential Deletion
Note:
You can also make settings from the device's control panel.
1.
Access Web Config and select the
Device Management
>
Stored Data
.
2.
Select
ON
for
Sequential Deletion from Hard Disk
.
3.
Click
OK
.
Related Information
&
“Application for Configuring Printer Operations (Web Config)” on page 405
Formatting the Internal Hard Disc
1.
Select
Settings
on the home screen on the printer's control panel.
2.
Select
General Settings
>
System Administration
>
HDD Erase Settings
.
3.
Select
Erase All Memory
.
4.
Select
High Speed
,
Overwrite
, or
Triple Overwrite
according to the purpose.
5.
Select
Yes
on the confirmation screen.
Monitoring a Remote Printer
Checking Information for a Remote Printer
You can check the following information of the operating printer from
Status
by using Web Config.
❏
Product Status
Check the status, cloud service, product number, MAC address, etc.
❏
Network Status
Check the information of the network connection status, IP address, DNS server, etc.
>
>
551
