5.
Select
Advanced
>
TCP/IP
.
Note:
When you select
Advanced
, you need to enter the administrator password for the additional network.
6.
Select
Manual
for
Obtain IP Address
.
When you set the IP address automatically by using the DHCP function of router, select
Auto
. In that case, the
IP Address
,
Subnet Mask
, and
Default Gateway
on step 7 to 8 are also set automatically, so go to step 9.
7.
Enter the IP address.
When entering an IP Address, enter zeroes (0) to make three digits as shown in the following example.
Example:
❏
If the IP address is 192.0.2.111, enter 192.000.002.111.
❏
If the IP address is 192.0.12.10, enter 192.000.012.010
Confirm the value reflected on the previous screen. After the IP address is entered, the zeroes you entered to
make three digiits are omitted.
8.
Set up the
Subnet Mask
and
Default Gateway
.
Confirm the value reflected on the previous screen.
c
Important:
If the combination of the IP Address, Subnet Mask and Default Gateway is incorrect,
Start Setup
is inactive
and cannot proceed with the settings. Confirm that there is no error in the entry.
9.
Enter the IP address for the primary DNS server.
Confirm the value reflected on the previous screen.
Note:
When you select
Auto
for the IP address assignment settings, you can select the DNS server settings from
Manual
or
Auto
. If you cannot obtain the DNS server address automatically, select
Manual
and enter the DNS server address.
Then, enter the secondary DNS server address directly. If you select
Auto
, go to step 11.
10. Enter the IP address for the secondary DNS server.
Confirm the value reflected on the previous screen.
11. Tap
Start Setup
.
Setting the Proxy Server (When Using an Additional Network)
Set up the proxy server if both of the following are true.
❏
The proxy server is built for Internet connection.
❏
When using a function in which a printer directly connects to the Internet, such as Epson Connect service or
another company's cloud services.
The proxy server is only available on the standard network.
1.
Select
Settings
on the home screen.
When making settings after IP address setting, the
Advanced
screen is displayed. Go to step 3.
>
>
Settings when Using an Additional Network
384
