2.
Select
General Settings
>
Network Settings
>
Standard
>
Advanced
.
3.
Select
Proxy Server
.
4.
Select
Use
for
Proxy Server Settings
.
5.
Enter the address for the proxy server by IPv4 or FQDN format.
Confirm the value reflected on the previous screen.
6.
Enter the port number for the proxy server.
Confirm the value reflected on the previous screen.
7.
Tap
Start Setup
.
Connecting to Ethernet (When Using an Additional Network)
Connecting to Ethernet on the Standard Network
Connect the printer to the standard network by using an Ethernet cable, and then check the connection.
1.
Connect the printer and hub (LAN switch) by Ethernet cable.
2.
Select
Settings
on the home screen.
3.
Select
General Settings
>
Network Settings
>
Standard
>
Connection Check
.
The connection diagnosis result is displayed. Confirm the connection is correct.
4.
Tap
OK
to finish.
When you tap
Print Check Report
, you can print the diagnosis result. Follow the on-screen instructions to
print it.
Connecting to Ethernet on an Additional Network
Connect the printer to the additional network by using an Ethernet cable, and then check the connection.
1.
Connect the printer and hub (LAN switch) by Ethernet cable.
2.
Select
Job/Status
on the home screen.
3.
Select the
Printer Status
tab, and then select the
Options
tab.
The Ethernet connection status is displayed. Confirm the connection is correct.
Selecting the Network Transmission Route (When Using an Additional
Network)
The following scan and fax functions are available from the printer's control panel on either the standard or
additional network.
>
>
Settings when Using an Additional Network
385
