Note:
❏
If you do not know the SSID, check if it is written on the label of the wireless router. If you are using the wireless
router with its default settings, use the SSID written on the label. If you cannot find any information, see the
documentation provided with the wireless router.
❏
The password is case-sensitive.
❏
If you do not know the password, check if the information is written on the label of the wireless router. On the label,
the password may be written "Network Key", "Wireless Password", and so on. If you are using the wireless router
with its default settings, use the password written on the label.
Related Information
&
“Entering Characters” on page 32
&
“Checking the Network Connection Status” on page 320
Making Wi-Fi Settings by Push Button Setup (WPS)
You can automatically set up a Wi-Fi network by pressing a button on the wireless router. If the following
conditions are met, you can set up by using this method.
❏
The wireless router is compatible with WPS (Wi-Fi Protected Setup).
❏
The current Wi-Fi connection was established by pressing a button on the wireless router.
Note:
If you cannot find the button or you are setting up using the software, see the documentation provided with the wireless
router.
1.
Tap
on the home screen.
2.
Tap
Router
.
3.
Tap
Start Setup
.
4.
Tap
Wi-Fi Setup
.
If you have made Ethernet settings, check the message and then tap
Yes
.
5.
Tap
Push Button Setup(WPS)
.
6.
Follow the on-screen instructions.
If you want to check the network connection status for the printer after setup is complete, see the related
information link below for details.
Note:
If connection fails, restart the wireless router, move it closer to the printer, and try again. If it still does not work, print a
network connection report and check the solution.
Related Information
&
“Checking the Network Connection Status” on page 320
Adding or Replacing the Computer or Devices
>
Re-setting the Network Connection
>
308
