manualshive.com logo in svg

Epson WF-5620, User Manual

The Epson WF-5620 is a high-performance all-in-one printer designed for small offices. With its user-friendly interface, this versatile printer ensures seamless printing, scanning, copying, and faxing. Enhance your workflow by easily accessing the comprehensive User Manual, available for free download from our website.

Share
Download
background image

• Allow space behind the product for the cables, and space above the product so that you can fully raise

the document cover.

• Leave enough space in front of the product for the paper to be fully ejected.

• Avoid locations that are subject to rapid changes in heat or humidity, shocks or vibrations, or dust.

• Do not place or store the product outdoors.

• Do not place the product near excessive heat sources or in direct sunlight.

• Leave enough room around the product for sufficient ventilation. Do not block or cover openings in the

case or insert objects through the slots.

• Keep the product away from potential sources of electromagnetic interference, such as loudspeakers

or the base units of cordless telephones.

• When connecting the product to a computer or other device with a cable, ensure the correct

orientation of the connectors. Each connector has only one correct orientation. Inserting a connector
in the wrong orientation may damage both devices connected by the cable.

• Do not touch the flat white cable inside the product.

• Do not move the print head by hand; this may damage the product.

• Do not spill liquid on the product or use the product with wet hands.

• Do not use aerosol products that contain flammable gases inside or around the product. Doing so may

cause fire.

• Do not press too hard on the document table when placing originals.

• Do not open the scanner section while the product is copying, printing, scanning, or performing any

other functions.

• Be careful not to trap your fingers when closing the document cover or scanner.

• Except as specifically explained in your documentation, do not attempt to service the product yourself.

• Unplug the product and refer servicing to qualified service personnel under the following conditions: if

the power cord or plug is damaged; if liquid has entered the product; if the product has been dropped
or the case damaged; if the product does not operate normally or exhibits a distinct change in
performance. Adjust only those controls that are covered by the operating instructions.

• Leave the ink cartridges installed. Removing the cartridges can dehydrate the print head and may

prevent the product from printing.

• Before transporting the product, make sure that the print head is in the home (far right) position and

the ink cartridges are in place.

319

Summary of Contents for WF-5620










































































































































































































































































































































Reviews:

No comments

Related manuals for WF-5620

Canon Color imageCLASS MF8580Cdw Getting Started Manual preview
Color imageCLASS MF8580Cdw
Brand: Canon Pages: 36
Canon Color imageCLASS MF8580Cdw Settings Manual preview
Color imageCLASS MF8580Cdw
Brand: Canon Pages: 20
Canon Color imageCLASS MF8280Cw Settings Manual preview
Color imageCLASS MF8280Cw
Brand: Canon Pages: 24
Canon Color imageCLASS MF8080Cw Starter Manual preview
Color imageCLASS MF8080Cw
Brand: Canon Pages: 39
Canon Color imageCLASS MF8050Cn Starter Manual preview
Color imageCLASS MF8050Cn
Brand: Canon Pages: 32
Canon Color imageCLASS LBP7660Cdn Quick Setup Manual preview
Color imageCLASS LBP7660Cdn
Brand: Canon Pages: 2
Canon Color imageCLASS 8180c Quick Start Manual preview
Color imageCLASS 8180c
Brand: Canon Pages: 24
Canon CD-300 Printer Manual preview
CD-300
Brand: Canon Pages: 30
Canon C3000 - MultiPASS Color Inkjet Printer Parts Catalog preview
C3000 - MultiPASS Color Inkjet Printer
Brand: Canon Pages: 41
Canon Color imageCLASS MF8170c Specification preview
Color imageCLASS MF8170c
Brand: Canon Pages: 2
Canon Color imageCLASS MF8170c Facsimile Manual preview
Color imageCLASS MF8170c
Brand: Canon Pages: 98
Canon Color imageCLASS MF8170c Instructions Manual preview
Color imageCLASS MF8170c
Brand: Canon Pages: 8
Canon Color imageCLASS MF8080Cw Configuration Manual preview
Color imageCLASS MF8080Cw
Brand: Canon Pages: 46
Canon Color imageRUNNER LBP5360 Release Note preview
Color imageRUNNER LBP5360
Brand: Canon Pages: 3
Canon ImageCLASS MF4570dw Basic Operation Manual preview
ImageCLASS MF4570dw
Brand: Canon Pages: 164
Canon imagePRESS C800 Series Service Manual preview
imagePRESS C800 Series
Brand: Canon Pages: 132
Canon ImageCLASS MF5730 Technical Information preview
ImageCLASS MF5730
Brand: Canon Pages: 2
Oki B2200 Specifications preview
B2200
Brand: Oki Pages: 2

Brands by name

Popular brands

Load more brands