Epson WF-5620 User Manual Download

Page: 292 / 329

Print Head Cleaning
Print Head Alignment

Related references

Paper Type Settings

Related tasks

Selecting Additional Layout and Print Options - Windows

Related topics

Loading Paper
Replacing Ink Cartridges and Maintenance Boxes

Blurry or Smeared Printout

If your printouts are blurry or smeared, try these solutions:

• Make sure your paper is not damp, curled, old, or loaded incorrectly in your product.

• Use a support sheet with special paper, or load special paper one sheet at a time.

• Make sure your paper meets the specifications for your product.

• Use Epson papers to ensure proper saturation and absorption of genuine Epson inks.

• Make sure the paper type setting in your product software matches the type of paper you loaded.

• If you are printing on thick paper or envelopes, turn on the

Thick Paper

setting from the control panel

or select

Thick Paper and Envelopes

in the Extended Settings of the printer software. (Turning this

setting on will decrease print speed.)

• Remove each sheet from the output tray as it is printed.

• Avoid handling printouts on glossy paper right after printing to allow the ink to set.

• Turn off any high speed settings in your product software.

• If you print on both sides of a sheet of paper, smudges may appear on the reverse side of heavily

saturated or dark images. If one side of a sheet will contain a lighter image or text, print that side first.
Adjust the

Print Density

and/or

Increase Ink Drying Time

settings.

• Run a nozzle check to see if any of the print head nozzles are clogged. Then clean the print head, if

necessary.

• Align the print head.

• Clean the paper path.

292

Summary of Contents for WF-5620










































































































































































































































































































































Search results

Summary of Contents for WF-5620

Reviews:

Related manuals for WF-5620

Brands by name

Popular brands

Epson WF-5620, User Manual

Search results

Summary of Contents for WF-5620

Reviews:

Related manuals for WF-5620

Brands by name

Popular brands