Epson SC-R5000 Series User Manual Download Page 8

Page: 8 / 148

Introduction

Printer Parts

Front Section

The illustration shows the SC-R5000 Series.

Maintenance cover (left)

Open this cover to clean the area around the print head. Normally closed when using the printer.

“Cleaning Around the Print Head” on page 79

Curing heater

Cures and fixes the ink in the printouts. If you touch print outs containing ink that has not been cured, your
hands will be soiled with ink.

Cutter groove

Pass the blade of a cutter (available in the market) down this groove to cut media.

“Replacing Media that is not Expended ” on page 65

Tension bar

The tensioner maintains tension to prevent the media sagging as it is taken up.

“Using the Auto Take-up Reel Unit” on page 55

SC-R5000 Series/SC-R5000L Series User's Guide

Introduction

Summary of Contents for SC-R5000 Series





















































































































































Search results

Summary of Contents for SC-R5000 Series

Reviews:

Related manuals for SC-R5000 Series

Brands by name

Popular brands

Epson SC-R5000 Series, User Manual

Search results

Summary of Contents for SC-R5000 Series

Reviews:

Related manuals for SC-R5000 Series

Brands by name

Popular brands