Epson SC-R5000 Series User Manual Download Page 136

Page: 136 / 148

Close the covers on the left and right.

Close the printer cover and the maintenance
covers on the left and right.

Post-Move Setup

After moving the printer, follow the steps below to
ready it for use.

If you have removed the curing heater, be sure
to see the following to install it correctly.

Check that the new location is appropriate, and
attach the parts that were removed.

Regions other than North America and Latin
America :

Setup Guide

(booklet)

If you do not have the

Setup Guide

on hand,

select and refer to the model of your printer
from

http://epson.sn

North American and Latin American users:
Contact your dealer for product installation.
The product must be installed by an authorized
dealer. Damage to the product from
unauthorized installation will not be covered by
your Epson warranty.

Plug in the power cables and turn the printer on.

Regions other than North America and Latin
America:

Setup Guide

(booklet)

Perform a Print Head Nozzle Check to check
for clogged nozzles.

“How to Print a Nozzle Check Pattern” on

page 95

Execute

Print Adjustments

in the Settings

menu.

“Optimizing Media Settings (Automatic

Adjustment)” on page 61

Transport

Before transporting the printer, contact your dealer or
Epson Support.

“Where To Get Help” on page 143

SC-R5000 Series/SC-R5000L Series User's Guide

Appendix

136

Summary of Contents for SC-R5000 Series





















































































































































Search results

Summary of Contents for SC-R5000 Series

Reviews:

Related manuals for SC-R5000 Series

Brands by name

Popular brands

Epson SC-R5000 Series, User Manual

Search results

Summary of Contents for SC-R5000 Series

Reviews:

Related manuals for SC-R5000 Series

Brands by name

Popular brands