Item
Parameter
Explanation
Error Tone
Volume
0
Sets the volume and the repetitions of sounds when an error occurs and
printing cannot continue.
1
2
3
*
Repeat
Off
Until Stopped
*
Sound Type
Pattern1
*
Sets the type of sounds. Sounds that are easy to hear in the printer's
operating environment can be set.
Pattern2
Sleep Timer
1 to 240 (15
*
)
Set how long before the printer enters sleep mode when no print jobs
are received and no errors are detected. In sleep mode, heaters turn off,
the control panel turns off, and the internal motors and other
components consume less power.
To reactivate the control panel display, press any button in the control
panel except
P
. The control panel display will however turn off again if
no operations are performed for another 30 seconds under these
conditions. The printer and heaters are only fully reactivated when a
print job is received, the media loading lever is used, or another
operation involving printer hardware is performed.
Date/Time Settings
Date/Time
Set the printer’s built-in clock. The time set here is displayed on the
Home screen. It is also used for job logs and the printer's status as
shown in Epson Edge Dashboard.
Time Difference
-12:45 to +13:45
Set the time difference with coordinated universal time (UTC) in 15
minute increments. In network environments with a time difference, set
this as necessary when administrating the printer.
SC-R5000 Series/SC-R5000L Series User's Guide
Control Panel Menu
107
