Item
Parameter
Explanation
Job Connection
On
*
When this is set to
On
, the next job starts printing without performing
operations, such as feeding media through the curing heater or
rewinding the media after curing, between continuous print jobs. There
are no operations between jobs so printing time is that much shorter.
Continuous print jobs are a series of jobs in which the print job data is
sent from the computer to the printer as soon as the previous print job
data has been sent from the computer and received by the printer. If
the pass mode is different between the previous print job and the next
print job, the jobs are not connected.
Off
Media Detection
Width Detection
On
*
Select whether the media width is detected (
On
) or not (
Off
). Try
setting
Off
when printing if media width errors are displayed even
though the media is correctly loaded. However, we recommend setting
this to
On
when using the printer. Changed settings are reflected when
the media is reloaded.
Off
Media Width
300 to 1625.6 mm
(300
*
)
(11.81 to 64.00
inches [11.81*])
When
Width Detection
is
Off
, the value of the media width must be set
correctly according to the width of the media loaded in this setting.
If the correct media width is not set, the printer may print beyond the
edges of the media. Ink used outside the edges of the media will stain
the inside of the printer.
End Detection
On
*
Select whether or not (
On
/
Off
) the end of the media is detected. Try
setting
Off
when printing if media out errors are displayed even though
the media is correctly loaded. We recommend this normally be set to
On
when using the printer.
Off
Detect Paper Skew
On
Select whether the printer will stop printing and display an error (
On
) or
whether the printer will continue printing (
Off
) when skewed media is
detected.
On
is recommended in most circumstances, as skewed media
may cause the printer to jam.
Off
*
Nozzle Check between Pages
On
When
On
is set, a nozzle check pattern is printed periodically at the
specified timing. When printing is complete, you can visually inspect
the check pattern to determine whether there are any stripes or
unevenness in the preceding or following printout.
Print Page
sets the timing at which check patterns are printed.
Print Page
Each 1 to 9999 pages
Off
*
SC-R5000 Series/SC-R5000L Series User's Guide
Control Panel Menu
110
