Epson Mobilink TM-P60 Technical Reference Manual Download Page 93

Page: 93 / 148

Rev.

Wireless LAN Setup Detailed Information

A-21

TM-P60 with Peeler Technical Reference Guide

Information

Click the Information tab and dialog below is displayed. You can confirm the current setting of
the TM-P60 with Peeler.

❏

Network-Card Information

Information about the Network-Card is displayed.

•

Return to Default button

This returns the settings of the TM-P60 with Peeler to the factory settings.

Item

Explanation

MAC Address

MAC Address is displayed.

Hardware Version

Hardware Version is displayed.

Software Version

Software Version is displayed.

Model Name

Model Name of the TM printer is displayed. (TM-P60 with Peeler)

Location

TM-P60 cannot use this.

Summary of Contents for Mobilink TM-P60





















































































































































Search results

Summary of Contents for Mobilink TM-P60

Reviews:

Related manuals for Mobilink TM-P60

Brands by name

Popular brands

Epson Mobilink TM-P60, Technical Reference Manual

Search results

Summary of Contents for Mobilink TM-P60

Reviews:

Related manuals for Mobilink TM-P60

Brands by name

Popular brands