Epson Mobilink TM-P60, Technical Reference Manual

Page: 56 / 148

3-2 Troubleshooting Rev. B
Note:
The ERROR LED is on when the printer is offline (paper out, power-on initialization, roll paper cover
open, power-off operation, or the remaining battery charge is not enough for printer operation when the
battery is used to supply the power.)
(* 1) Print temperature error is not an abnormality.
When you see an error described as “Impossible to recover“ in the recovery column, turn off the printer as
soon as possible and consult your dealer.
When the printer beeps, see also “ Beeping Types” (page 3-2).
3.2 Printer Beeps
3.2.1 Beeping Types
The printer beeps in some situations. The beeping patterns are as follows.
Note:
For details about the status sheet, see “Status sheet printing” (page 3-4).
Beeping Pattern The beeping indicates mean
Beeping
times Stop with memory
switches
•
Battery remaining amount is “L level”
or less
•
The printer can’t find an Access
point.
•
Roll paper end
•
An error has happened.
5 times Possible
•
Battery remaining
amount [Msw 8-2]
•
Can’t find Access
point [Msw 8-3]
•
Roll paper end
[Msw 8-4]
•
Error has happened
[Msw 8-5]
•
A status sheet is printed (when you
press the FEED button)
•
A radio field intensity check is
executed.
(when you press the FEED button)
1 time Impossible
•
A radio field intensity check sheet is
printed (4 seconds have passed
after the FEED button was pressed.)
Until
printing is
started. Impossible
1000 ms ON 1000 ms OFF
100 ms ON
100 ms ON
1900 ms OFF